Chromag Basis Grips

Durometer // 25a
Length // 142mm
Diameter// 30mm
End Clamp // Split-Teardrop
Weight // 104g/pair

Chromag Basis, Squarewave and Palmskin grips feature our unique ‘Split-Teardrop’ end clamp which covers the bar end while still utilising a true pinch-clamp for the best purchase to the bar.

The Format grip uses a single, inner end clamp. The core of the grip tapers towards the outer end to maintain a secure fit despite the lack of an outer clamp.

The Liaison Wax grips are an ‘all rubber grip’ (without a plastic core or lock-on ends).

• Clean and inspect the handlebar before mounting the grips. Ensure there are no burrs or sharp edges at the end of the bars, no residue, cracks or damage.
• Slide grips onto the handlebar making sure the end of the grips is flush with the end of the handlebar.
• Tighten the bolts on each of the end clamps. Be careful to not overtighten, and use a good allen key to avoid stripping the bolt heads.
• Chromag lock-on grips come with a built in end cap to protect the ends of the handlebars and provide safety. The Liaison Wax grips are supplied with matching bar end plugs which should be pressed into the handlebar.

- When removing lock-on grips, make sure to use a good allen key and thoroughly clean the bolt head of dirt or grime to avoid stripping the bolt.

- It is not advisable to modify the grip in any way.

- Always use a bar end plug.

- Make sure the outer edge of the grip is flush with the outside edge of the bar.