Alpine Touring Ski Bindings
For skiers looking for the ultimate versatility in their setup, with uncompromising big mountain performance plus the ability to take advantage of true Pin Tech climbing functionality, the Duke PT ushers in a new era. Marker sets yet another milestone, adding to the Royal Family heritage with the introduction of this hybrid freeride binding for the 2020-21 season. The biggest highlight of this new binding is the innovative Quad-Lock Ride & Hike toe. In ride mode, it provides uncompromising downhill performance with full safety release properties from DIN 4-12. Switching the binding to hiking mode is simply a matter of unlocking the upper part of the toe piece and rotating it forward. Pin binding technology is integrated into the base plate underneath the toe housing and operates in much the same way as Marker's KingPin and Alpinist models. In uphill mode, you have the option of saving 250 grams weight per foot by removing the toe housing sections and stowing them in your backpack. To switch to downhill mode, the toe housing clicks back onto the base plate. It locks back into place thanks to Auto Quad-Lock technology, just by stepping into the binding, without any extra action required by the skier. Another advantage, the Hollow Linkage heelpiece gives the skier the security and power transmission as our Squire freeride binding on the way down. The Duke PT also features SOLE.ID technology, just like other products in the Royal Family. This makes the binding compatible with all boot sole types falling under the Alpine (ISO 5355), Touring (ISO 9523), or GripWalk (ISO 9523) norms. ANTI-ICE RAIL - Use the metal rail to scratch off ice and snow below your boot sole. LOCK & WALK BRAKE - Including neutral walking mode and 10° climbing aid. AUTO QUAD LOCK - Toe part locks itself at 4 different points automatically when stepping into the binding. RIDE & HIKE TOE - For great Royal Family downhill performance and release function combined with pin-technology for strong uphill performance; DIN 6 – 16 Convertible toe: - Save 300g per foot for the uphill. SOLE.ID - Height-adjustable gliding plate to be compatible with alpine (ISO 5355), touring (ISO 9523), and GripWalk soles. Easy to adjust: Pozi screw at the front to adjust the height of the gliding plate. HOLLOW LINKAGE HEEL - The Hollow Linkage Heel was designed to optimize retention for all common types of alpine and touring soles. The hollow axle saves on weight and maximizes the torsional stiffness. The very robust construction is best suited for the most strenuous requirements.
The innovative Kingpin has earned its stripes as the performance standard in PinTech AT binding technology. The Kingpin's unique toe and heel pieces offer a unique blend of characteristics that seek to optimize both climbing and descending. The toe piece is updated with the dual spring and higher pivot point setup from the Alpinist. Ease of use, and best of all, unbeatable power transmission while on the descent mean that you've never had a day in the backcountry like the ones you'll have on the Kingpin! CLIMBING AIDS KINGPIN - The climbing aid offers two positions with 7° and 13° which can easily be accessed with the ski pole, even in an unstable standing position. Integrated elastomer paddings dampen the impact reducing the irritating traditional “clack” and allow more comfortable hiking. XXL POWER TRANSMITTER - Extra large power transmitters in the heel with reduced weight for minimum friction and maximum centering for the lateral movement of the heel. KINGPIN HEEL - The revolutionary heel construction for the Pin Technology bindings features wide sole contact points to deliver the kind of direct, lossless power transfer more frequently seen in alpine bindings. The KingPin heel is also many times safer than traditional Pin Technology bindings. CARBON REINFORCED PIN TOE & ANTI ICE PADS - Carbon fiber reinforced material for improved stiffness and super lightweight. Anti Ice Pads in the base of the toe to prevent icing in critical areas. VERTICAL & LATERAL ADJUSTABLE RELEASE FUNCTION - Vertical and lateral individually adjustable release in the heel for improved release functionality. CRAMPON KINGPIN/ALPINIST - Easy to install crampons for KINGPIN and Alpinist available in the sizes 80mm, 90mm, 105mm, 120mm.
The ST Rotation 10 is impressive as a nearly indestructible binding with strong downhill performance, the highest comfort, and TÜV-certified safety. The patented DYNAFIT pivoting toe piece evens out impacts that can effect ski and binding on a powerful dynamic downhill. The binding release function is thus more reliable and effectively counters unwanted early release. A forward pressure of 10 mm ensures that the release value remains constant even when skis experience deflection. With its perfect bayonet positive lock at the heel unit, an extremely high power transfer from binding to ski is achieved for increased responsiveness and downhill performance. The Step-In Side Towers make entry into the toe piece more than 30% easier. Meaning fast as lightening you are fully and easily ready to get going. At the same time, it increases lateral stability on the descent. The “Hub Centering” system in all bindings with a pivoting toe piece makes it child’s play for users to click into the boot’s neutral position and thus makes it easy to adjust your position for climbing. The brake locks out in walk mode automatically for best user-friendly handling. Thanks to three different walk modes, you can climb with maximum comfort. The binding also offers 45 mm of flex in its length adjustment, enabling it to fit various sole lengths. The release values can be adjusted from DIN 4 to 10. As with all DYNAFIT bindings, the ST Rotation 10 has been developed and manufactured in Germany and offers DYNAFIT’s Lifetime Guarantee. ST Rotation 10 – Strong on the descent.
Page 1 of 1