Tools & Tuning

The Adjustable File Guide allows you to adjust your base edge bevel from 0.5 to 1.5 Degrees. Use with all types of files, stones and diamonds up to 6mm thick.

This sturdy Aluminum Side Edge File Guide from Wintersteiger allows you to apply a precise degree side edge angle on your skis or snowboard. This reliable tool can be used with most files and diamond stones. The innovative milled corner channel allows filings and shavings to fall away from the base, leaving you with a pristine work area. If you're planning on tuning your skis at home, make sure you have one of these file guides handy.

Bronze- Stiff brush for cleaning out wax before applying hot wax and exposing the structure. Horse Hair- High quality brush to expose the base texture Nylon- Stiff nylon bristle brush for perfect wax texturing

Professional race tune finish Edge de-burring and polishing For the finishing of ski and snowboard edges

The Wintersteiger Wax Iron Digital with LED Display is a smart and extremely innovative ski and snowboard waxing iron. With a digital readout LED screen to ensure precise temperatures at all times. Adjustable from 50° to 180° C. 15 mm thick heating plate with innovative dimpled surface which allows the wax iron to easily move across the base by reducing suction. The beveled edges let melted wax flow over the entire base evenly for consistent results.

To remove sidewall material. The ERGO RAZOR sidewall planer is essential to prep for side edge filing as it is common for a file to be compromised by cutting into the sidewall of a ski. It is very important to remove the sidewall material to avoid loading files with plastic and to keep the sidewall from interfering with the bevel on the edge. The razor has an ergonomic design that fits into the palm of the hand. It is adjustable and can be used with both the right and left hands. It comes with a round cutting blade

To clean debris from the teeth of files. Proper cleaning helps to prolong the life of a file and ensures better overall tuning results.

Used by World Cup Technicians because of the precision cut teeth and comfortable tangless design. Icecut files are also the straightest file available for accurate beveling and have one of the highest rockwell hardness for extended life.

To remove cooled wax from the base. After the wax has cooled to room temperature, any excess must be scraped off and the structure must be brushed. Always allow the wax and the ski or snowboard to cool to room temperature before scraping, otherwise the warm wax will be pulled from the pores, leaving the base dry.

An ergonomic, professional-grade ski sharpener for de-burring and honing ski or snowboard edges. Dial adjustable bevels, from 90 to 85 degrees Ball bearing roller system makes is easy to use and perfectly accurate Accepts all files, stones, and diamond stones up to 5mm thick Includes an 80mm ICECUT-file

Ergonomic design side and base edge sharpener is easy to use and allows your customers to maintain their edges between visits to your repair facility. Allows for 89° to 86° side edge bevel and 0.5° and 1° base edge bevel.

For the finishing of ski, snowboard and skate edges. The latest in diamond stone technology from Europe. The rigid composite body resist flex during use. The unique diamond design with ultra high quality diamonds means a long life. Best used with water.

Heavy duty, high-tensile aluminium vise for tuning skis. The Ski Vise RACING has jaws with 70 mm of holding surface and is built to withstand heavy use. The holding frame includes shelfless jaws that will hold any shape sidewall and can accommodate riser plates. The adjustable guide blocks includes the locking spindle. This vise allows a positioning of 60° when tuning the side edge for faster and simpler tuning. Opening from 40 to 100 mm.

Sturdy, high-tensile aluminium vise for tuning all types and shapes of skis.The Vise SPORT PLUS is a very easy to use for tuning all types and shapes of skis. Features sturdy high tensile aluminum and is light and easy to transport. The holding system keeps the ski secure for base and side edge work. Includes 2 brake retainers (packaged for retail). NEW:this vise allows also a 60° positioning of the skis for fast and simple edge tuning.

The Wintersteiger Red Soft Gummi is perfect for fine polishing and buffing the edge of your skis and snowboard. This gummi stone is softer than most, making it ideal for the most delicate and finest polishing. You can also finish off detuning your skis with this soft gummi stone from Wintersteiger.

Wintersteiger Vanilla Base Cleaner and Wax Remover is an organic compound that cleans up your skis like a breeze. Remove old wax before applying new with this non-corrosive formula. Ditch that dangerous hydrocarbon cleaner and use this fruit distillate ski cleaning solution instead. This product is also popular in bike and skate shops. Organic base cleaner for skis and snowboards Non-corrosive, safe formula Removes dirt and old wax 16oz (0.5 L)

High quality wax iron for skis and snowboards. Heats swiftly and will not burn waxes. Features a 100°C to 150°C knob for a precise temperature adjustment. Flat heating plate. 9 cm by 14 cm (3.5" by 5.5") heating plate. Ideal for travel as it weights only 580 g. It measures 15 x 10 x 11 cm, so it can fit in any backpack. Features a very long 68 inches (172 cm) or 5 2/3 feets power cord. 2-pin power plug to fit anywhere in North America.

A liquid spray-on training and racing wax that can be used alone, or as base for other racing waxes. For very wet conditions when the snow has turned transformed. Ideal for spring skiing when the dirt content typically is high, as HS10L collect less pollution from the snow than comparable paraffin waxes. A great choice in warm weather that never underperforms. Replaces the CH10XL. - +2°C to +10°C (36°F to 50°F).

HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions

HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions

PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply

PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).

PS8 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 130°C (266°F). - Recommended iron temp: 130°C (266°F). - Replaces the CH8X. - -4°C to +4°C (25°F to 39°F).

Deluxe Tune has everything to keep your skis or snowboard in peak shredding condition. If it's not in here, you don't need it! Actually, don't quote us on that. But it does pack most of the essential items you'll want on hand. From tuning and filing edges to scraping, waxing, and polishing bases, it's the perfect easy-carry kit for everyday trips to the mountain.

Variable weather conditions? When the snow is getting coarser from cyclical melting and freezing periods, you need the Wintersteiger Oval Nylon Base Brush. This wax brush does a nice job of exposing the base of your skis or snowboard to coarse snow, so you can have more fun on the slopes. This comfortable base brush has a hand strap for easy use and 10mm bristles that texture ski wax ideally for coarse grained snow. These base brushes are perfect for at home ski tuners, and for someone who plans to texture their skis on the hill, once they have seen the conditions.

The Wintersteiger VIIALA World Cup Cut 1 Hardchromed File is high-quality and the straightest hard-chrome file available used by World Cup tuners. Cut 1 is coarse, leaving a smooth finish.