Hubs

Shimano's ZEE Rear Freehub is a quick engaging, smooth-running hub that doesn't drain the bank account. It features quality sealing, adjustable angular-contact bearings, and rotates on an extra-stiff one-piece rear axle with integrated cone construction. It's Center Lock compatible and is available in 135, 142 and 150mm configurations.

At the Center of It All Cast your eyes upon your new favorite component, the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery-fast speed by way of solid, smart design. Power To The Pedal Let's add it up: a 60-tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. Overbuilt But Not Overkill With this hub, bigger is better. An oversized hub shell ads stiffness and stability while large and in-charge 6902 bearings perform for the long run.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Reliability meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. - Engineered in Germany with better seal design for improved durability - Compatible with e-mountain bikes - Spoke Count: 32H - Boost only - 6-bolt brake interface

Zipp's ZM2 hubset delivers dependable precision performance to the gnarliest trail. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. The genius of the ZM2 hub is how we achieved quicker engagement. This hub system works with 12 pawls, in 4 groups of 3, on a 33-tooth ratchet ring. The 33 teeth make the ring strong with pickup that's reliable and consistent. The 4 groups of 3 pawls are staggered, meaning there are always 3 pawls engaging at any time, which boosts durability. The ZM2 also has higher load transmission capability. The hub is capable of being used on electric mountain bikes. - Engineered in Germany with better seal design for improved durability - 132 points of engagement - Designed with 12 pawls (4 groups of 3) for quick engagement - Strong ratchet ring maximizes load capacity - Compatible with e-mountain bikes - Spoke Count: 32h - Boost only - 6-bolt brake interface

In designing an upgraded hubset for our pro-proven Firecrest wheel lineup, we turned to our engineering colleagues at SRAM's development center in Schweinfurt, Germany. The result is the ZR1 hubsets for disc wheels. This hubset features better seal design for improved durability and quicker response with 66 points of engagement. Our engineers spent more than two years developing the ZR1. Proving the durability of the hubset included more than 58,500km of test riding, part of 3,222 hours of total testing. The ZR1 features key technology from Zipp's Cognition hubs. The seal design is the same as the Cognition, with a large dust cap at the base of the driver body and better bearing seals for more protection. The bearing size also is the same as the Cognition, although the Cognition uses a premium bearing. The six pawls are offset to work in two groups of three pawls. There are always three pawls engaging. This design creates a quick engagement feel, with 66 points of engagement. The driver body is designed so pawls stay in place for disassembly to make service convenient. Zipp hubs are designed to use J-bend spokes, the most popular type of spokes today. J-Bend, widely available, are easier to replace. - Better sealing, increasing durability over previous hub model - Quick engagement for a responsive ride - Lightweight - Same bearing size as premium-level Cognition hub - e-bike certified - Disc brake hub with Center Lock rotor interface. The lock ring is included

An evolution of their world-renowned Supreme hubs - the Arrow Rear Hub from WeThePeople is a super lightweight alternative for the pegless riders out there looking for unrivaled performance and quality. Using the same bombproof Q-Lite internals and "IGUS" bushing driver as the Supreme Cassette, the Arrow's 7075-T6 alloy axle, and knurled CNC-machined cones help keep this hub incredibly light and give it a super smooth look unlike any other hub on the market.

WTP Helix front hubs feature a 6061-T6 alloy refined hub shell with 2 high quality sealed bearings. - Alloy CNC cones - Includes 2x nylon hub guard - Hub Drilling: 36 - Axle Size: 3/8" - Spoke Interface: J-Bend

- Threaded for multi-speed freewheel (7sp), includes 70mm drum brake - A356 aluminum hub shell with 9mm solid axle (183mm overall axle length) - Freewheel and brake lever sold separately

Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.

The 3.30/3.30Ti 9mm Thru Axle Hub Kit makes Stan's 3.30 front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

Replacement end caps for Stan's NoTubes rear hubs with XD Driver.

Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

The 3.30HD 9mm Thru Hub Kit makes Stan's 3.30HD front hubs 9mm through axle compatible. Installation is easy—just pull the old ones off and put the new ones on.

Stan's 3.30HD QR Hub Kit makes Stan's 3.30HD front hubs quick-release compatible. Installation is easy—just pull the old ones off and put the new ones on.

Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.

Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.

This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.

- HEX DRIVE 102T technology delivers 3.5° engagement for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Forged and CNC weight-optimized alloy hub body - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination - QR end caps included with all hubs - Cassette/Driver: choose; Shimano HG-11, or Scram XDR - Axle/Spacing: 12x142mm Thru Axle (includes 10mm QR endcaps) - Hole: 28h

- Highly weight-optimized front hub, ideal for Gravel and XC. - 28mm-diameter bearings minimize overall weight and allow adaptability up to 15mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 28 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination

- Weight optimized, gravity inspired front hub - 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 32 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination

- Weight-optimized, gravity-inspired front hub - 32mm-diameter oversized bearings allow adaptability up to 20mm thru axles - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Compatible with 32 HEX front hub adapters only - Advanced seal system improves prevention of bearing contamination

- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination

- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination

- SPANK's HEX DRIVE 102T technology delivers 3.5° engagement, for almost instant pickup - 6 independent pawls with 3 steps per pawl, work in unison, meaning 18 engagement points per click - Bite-Block Alloy HG and XD Freehub bodies resist damage from cassettes without the weight penalty of steel - Unique flange design reduces dish requirement and minimizes tension range between drive-side and non-drive-side spokes - Advanced seal system improves prevention of bearing/drive system contamination

- Micro Spline freehub for Oozy/Spike rear hubs - Material: steel

- Ultra-tough 5 bearing Single Speed rear hub for All Mountain, DJ, FR, Pumptrack, and BMX. - Integrated 3mm 11T Cog Freehub (for 1/8" SS Chains) - Female Axle, M10 Lock-down Bolts, Alloy End-Caps - Wide Flange design eliminates dish in rear wheel, maximizing wheel strength & stiffness - Hole count: 32H - 6-bolt

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

Shimano Alfine Center Lock Dynamo Front Hub - Compatible with 26 to 28-inch wheel sizes - Light alloy QR lever and nut - 6V, 3.0W output - Centerlock rotor mount - Spoke Interface: J-Bend - Weight: 575g